In our last blog post, we discussed how to map networks in PA System Lite to enable seamless connectivity and management of IP devices: ip speaker, ip paging adapter, ip intercom, sip pcb and ip phone in different locations. Building upon that, this week we will delve into the topic of network mapping in Tonmind PA System Pro, empowering users to establish efficient connections and effectively manage IP devices across multiple areas. Whether you dealing with SIP speakers, ip video intercom, or other IP devices, the ability to map networks in Tonmind PA System Pro brings unmatched convenience and control. Join us as we explore the step-by-step process of network mapping in Tonmind's powerful PA System Pro, revolutionizing the way you connect and manage your IP devices across diverse environments. Let's dive in and unlock the full potential of PA System Pro for seamless integration and effortless control.

Join us as we delve into the intricacies of mapping PA system Pro and discover how this advanced solution opens up new possibilities for managing and leveraging Onvif speaker and IP devices across multiple locations. Learn how this innovative approach can enhance collaboration, improve communication, and revolutionize the way we orchestrate IP audio system in diverse settings as follows.

PC Local IP: 192.168.5.209

Public IP: 120.41.66.104

SIP sever port: 5090

SIP trunk port: 5080

HTTP port: 9191

NOTE: The RTP ports of most routers on the market can be used without mapping, depending on the user's router configuration requirements.

1. Enter the IP address of the local router in any browser, log in and set up the NAT server. Usually we set the ports of SIP and SIP trunk, and set the HTTP port if it is used.

2. SIP sever port mapping: put local IP 192.168.5.209 and SIP port 5090 as shown below.

3. SIP trunk port mapping: put local IP 192.168.5.209 and SIP port 5080.

4. HTTP port maping: put local IP 192.168.5.209 and SIP port 9091.

5. Enable NAT IP: enter the public IP of the router and save confirmation, then all the mapping has been finished. You can register IP devices in WAN to this SIP sever/local IP.